If you’re familiar with US military hardware, you’ll recognise the M57 mechanical mod as a pretty authentic replica of the ‘Clacker’ trigger device for a Claymore mine. All you’ll find inside the M57 mod is space for two parallel-connected 18650 batteries (not supplied). This military style mod has a raised 510 platform that will accommodate tanks and drippers up to 24mm in diameter without overhang.

Pilot Vape’s M57 mod is a no-frills device, without a screen, LEDs or any protective circuitry. The single safety feature is a flip-up wire bar that prevents the Fire lever from being fully depressed. Correct battery fitting is essential for this basic mechanical mod. You’ll find the correct battery polarity marked on a large label in the battery bay. To avoid catastrophic battery failure, it’s essential that you fit two 18650 batteries (not included) as described on the label.

With no control chip, the M57 mechanical mod feeds whatever power is available in the dual batteries directly to a connected tank, RBA, RDA or RTA. This device has no over-discharge protection, so you’ll need to remove the batteries for charging when the power runs low. Like many basic mechanical mods, the M57 has no on-board charging facility. The mod has an easily removeable, magnetic battery bay panel. The battery bay has a handy fabric strip for battery extraction.

The Green version of the Pilot Vape M57 mech mod has a particularly authentic military look. Even though these devices are stamped with “Winner, winner chicken dinner” you may have trouble trying to take this mod into a public venue. The M57 mod may also attract the attention of security staff at airports, train stations and other public places!

This rugged, ABS mod can be ordered in Red.
 
Contents:
1 x Pilot Vape M57 Mechanical Mod
1 x M57 User Manual
 
Product Features:
Pilot Vape M57 Mech Mod Features:
Dimensions: 95mm x 80mm x 30mm (irregular shape)
Connector: Sprung 510 – brass plate on circular 24mm platform
Max tank diameter: 24mm to avoid overhang
Weird engraving on brass tank plate
Style: Military style, no-frills mechanical mod
Manufactured to look like a ‘Clacker’ remote claymore mine trigger
Battery type: 2 x 18650 batteries (not included)
Parallel battery configuration
Battery polarity label in battery bay
Batteries must be inserted with correct polarity
Magnetic battery bay door
Fabric strip for battery removal
No long firing cut-out
No over discharge protection
No on-board battery charging
Features a grenade style Fire bar
Features a wire safety clip to prevent accidental depression of Fire bar
Direct output device delivering full power to a connected atomizer
Military styling may cause alarm if used in a public place
Available in Red or Green

M57 Mech Mod Compatibility: 
This mod’s 510 connector is mounted on a 24mm diameter circular platform which is about 4mm tall. Any tank larger than 24mm in diameter will overhang the platform. This direct output mechanical mod is recommended for use by experienced vapers only. To avoid catastrophic battery failure, please follow the battery polarity instructions provided by the manufacturer.
 
Unregulated mods are for advanced users only, which requires knowledge of Ohms Law, battery capabilities, and RDAs. If you are not comfortable with using this device, don’t purchase. Improper use can lead to battery venting and/or explosion. Do NOT use with sub tanks

DO NOT have a unregulated device upon your persons with a battery installed, after each use please remove the battery and store in a suitable Battery case. 

DO NOT carry any batteries loose in your pocket, bag etc. if a circuit is made i.e. pocket full of change and keys, this will create a dead short circuit and create the battery to vent with devastating effects. 

Vape Animal cannot be held responsible and accept no liability for the misuse of this product, or damage caused to property and / or persons. 

By purchasing this device you agree to assume all liability associated with its use.